HIKVISION DS-KH6320-WTE1 User Manual

Steps
1. On the main page, click Access Control → Video Intercom to enter the Video
Intercom page.
2. Click Noce to enter the Noce page.
Figure 3-7 Search Noce
3. Set the search condions, including noce type, subject, recipient, start me and
end me.
Recipient
Input the recipient
informaon in the Recipient eld to search the specied
noce.
Subject
Input the keywords in the Subject eld to search the matched noce.
Type
Click to unfold the drop-down list and select the noce type as Adversing
Informaon, Property Informaon, Alarm Informaon or Noce
Informaon
. Or select All to search noces with all types.
4.
Oponal: You can click Reset to reset all the congured search condions.
5. Click Search and all the matched noces will display on this page.
●
Check the detailed
informaon of searched noces, such as sending me,
sending status, etc.
●
Input keywords in the Search
eld to lter the searching result.
Network Indoor
Staon Operaon Guide
19

HIKVISION DS-KH6320-WTE1 Specifications

General

Display Size	7 inch
Resolution	1024 × 600
Network Protocols	TCP/IP, SIP, RTSP
Audio Input	Built-in omnidirectional microphone
Audio Output	Built-in loudspeaker
Power Consumption	≤ 6 W
Operation Method	Touchscreen
Audio Compression Standard	G.711 U
Audio Compression Rate	64 Kbps
Wi-Fi Standard	IEEE802.11 b/g/n
Wi-Fi Frequency Range	2.4 GHz
RS-485	1
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Audio	Two-way audio
Power Supply	12 VDC, PoE (IEEE802.3af)
Installation	Wall-mounted
Display Type	TFT LCD
Network Interface	10/100 Mbps Ethernet
Alarm Output	1 channel
TF Card	up to 32 GB
Working Humidity	10% to 90%