HIKVISION DS-KH8350-WTE1 Configuration Guide

Note
●
The ring to be imported should be in the wav format, and the size of the ring cannot be larger
than 300k.
●
Up to 4 rings can be added.
Arming Informaon
Click Arming Informaon to enter the conguring arming informaton page and view the arming
informaon.
Figure 4-16 Arming Informaon
Click Refresh to refresh the arming informaon.
Relay
Some indoor staon devices support this funcon.
Click Relay to enter the set relay parameters page.
Select a relay and click "
" and set the relay name and output delay me. Click Save to enable
the sengs.
Click Copy to..., and select a relay you want to copy to. Click Save to enable the sengs.
SIP No.
Sengs
Steps
1.
Click SIP No.
Sengs to enter the sengs page.
Network Indoor Staon Conguraon Guide
57

HIKVISION DS-KH8350-WTE1 Specifications

General

Product color	Black
Package weight	899 g
Indoor unit included	Yes
Outdoor unit included	No
Display diagonal	7 \
Display resolution	1024 x 600 pixels
Operating system installed	Linux
Voice codecs	G.711u
Number of speakers	1
Certification	FCC, IC, CE, C-TICK, ROHS, REACH, WEEE, UL, CB, RCM
Connectivity technology	Wired & Wireless
Maximum number of cameras supported	-
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, SIP, RTSP
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Power consumption	200 mA
Indoor unit power type	DC
Power consumption (typical)	7 W
Operating relative humidity (H-H)	10 - 90 %
Main monitor station operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Weight	355 g
Door station dimensions (WxDxH)	180 x 140 x 22.4 mm