HIKVISION DS-KH9310-WTE1 User Manual

Steps
1. On the main page, click Access Control → Video Intercom to enter the Video
Intercom page.
2. Click Noce to enter the Noce page.
Figure 6-7 Search Noce
3. Set the search condions, including noce type, subject, recipient, start me and
end me.
Recipient
Input the recipient
informaon in the Recipient eld to search the specied
noce.
Subject
Input the keywords in the Subject eld to search the matched noce.
Type
Click to unfold the drop-down list and select the noce type as Adversing
Informaon, Property Informaon, Alarm Informaon or Noce
Informaon
. Or select All to search noces with all types.
4.
Oponal: You can click Reset to reset all the congured search condions.
5. Click Search and all the matched noces will display on this page.
●
Check the detailed
informaon of searched noces, such as sending me,
sending status, etc.
●
Input keywords in the Search
eld to lter the searching result.
Video Intercom 9 Series Indoor
Staon Operaon Guide
27

HIKVISION DS-KH9310-WTE1 Specifications

General

Brand	HIKVISION
Model	DS-KH9310-WTE1
Category	Intercom System
Language	English