Video Intercom Villa Door Station User Manual
17
●
Enable Manual Time Sync., set the time manually or check the Sync. with computer time.
Click Save to enable the settings.
DST
Click System Settings → DST to check Enable DST. Set the parameters according to your needs and
click Save to enable the settings.
Maintenance
Click Maintenance → Upgrade & Maintenance to enter the settings page.
Figure 5-2 Maintenance
●
Reboot: Click Reboot to reboot the device.
Restore
Click Restore to reset all the parameters, except the IP parameters and user information, to
the default settings.
Default
Click Default to restore all parameters to default settings.
●
Export parameters:
1. Select Device Parameters, and click Export to pop up the dialog box.
2. Set and confirm the encryption password.
3. Click OK to export parameters.
●
Import Config. File:
1. Click browse icon to select the configuration file.
2. Click Import and enter the encryption password to import.
●
Upgrade: Click browse icon to select the upgrade file.
Note
The upgrading process will last 1 to 10 minutes, do not power off during the upgrading. The
device reboots automatically after upgrading.
To Next Page
Loading...
