Digital Video Recorder Quick Start Guide
Figure 4-2 Camera Management
Step 2 Select an inactivated IP camera.
Step 3 Click Activation.
Step 4 Enter the same password in New Password and Confirm.
Step 5 Click OK.
Strong Password recommended–We highly recommend you create a strong password of your own
choosing (Using a minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters.) in order to increase the
security of your product. And we recommend you reset your password regularly, especially in the
high security system, resetting the password monthly or weekly can better protect your product.
4.2.2 Add IP Camera
Purpose:
You can add the activated IP cameras. Ensure the device and IP cameras are in the same network
segment.
Before you start:
The record and the camera to add must be in the same network segment.
Step 1 Go to Configuration > System > Camera Management.
To Next Page
Loading...
Need help?
General