Rail Network Video Recorder Quick Start Guide
15
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security system, resetting the password monthly
or weekly can better protect your product.
3.5 Network Management
Purpose:
To ensure network communication is well, you need to configure network parameters of LAN 2.
Before you start:
Connect the LAN 2 to a network switch with a network cable.
Port 1 and Port 2 respectively represent LAN 1 and LAN 2. LAN 1 is for debugging. LAN 2 is for connecting IP
cameras and network transmission.
Steps:
1. Enter the Local Network Settings interface.
Main Menu > Basic Settings > Network
2. Select Ethernet Port as Port 2.
3. Input the device IP address, Subnet Mask, Default Gateway, Preferred DNS Server, Alternate DNS Server,
and Download Server IP in the corresponding text fields.
4. Click Apply to save the new settings and click OK to exit.
Figure 3. 14 Local Network Settings
3.6 IP Camera Management
Purpose:
You need to activate IP cameras first and then add them.
Steps:
To Next Page
Loading...
Need help?
General
