HIKVISION DS-PEA22-F - Safety Instructions; General Safety and Electrical Precautions

Panic Alarm Station Quick Start Guide
iii
Applicable Models
This manual is applicable to DS-PEA series panic alarm station.
Product
Model
Panic Alarm Station
DS-PEA22-F(B)
Box Panic Alarm Station
DS-PEA22-B(B)
Pole Panic Alarm Station
DS-PEA22-P(B)
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Safety Instruction
 The device should be used in compliance with local laws and electrical safety regulations. Refer to the
appropriate documentation for detailed information.
 The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low Voltage) and the
Limited Power Source (100～120/200～240 VAC). Refer to the appropriate documentation for
detailed information.
 DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused
by overload.
 Make sure the plug is properly connected to the power socket.
 If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power
cable, and contact the service center.
 Do not drop the device or subject it to physical shock.
 Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
 Do not aim the lens at the sun or any other bright light.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.