Figure 3-2 Searching Online Devices
Note: Device can be searched and displayed in the list in 15 seconds after it goes online; it
will be removed from the list in 45 seconds after it goes offline.
Search online devices manually:
You can also click to refresh the online device list manually. The newly
searched devices will be added to the list.
Note: You can click or on each column heading to order the information; you can
click to show the device table and hide the network parameter panel on the right
side, or click to show the network parameter panel.
Modify device information
Steps:
1). Select the device to be modified in the device list as shown in Figure 3-3. The network
parameters of the device will be displayed in the Modify Network Parameters panel on the
right side as shown in Figure 3-4.
2). Edit the modifiable network parameters, e.g. IP address and port number.
3). Enter the password of the admin account of the device in the Password field and click
to save the changes.
To Next Page
Loading...
Need help?
General
