Need help?Do you have a question about the HIKVISION HWD-5104M and is the answer not in the manual?
General| Audio Bit Rate | 64 Kbps |
|---|---|
| Video Input | 4 channels |
| Video Output | 1-ch HDMI, 1-ch VGA |
| Compression | H.264+ |
| Storage | 1 SATA interface, up to 6TB |
| Network Interface | 1 RJ45 10M/100M adaptive Ethernet interface |
| Power Supply | 12 VDC |
| Sub-stream encoding | CIF/QCIF |
| Audio Output | 1 channel |
| Dual Stream | Yes |
| Hard Disk Interface | 1 SATA interface |
| USB Interface | 2 USB 2.0 |
| Working Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Operating Humidity | 10% to 90% |
| Video Compression | H.264+ |
Essential procedures for powering the device on and off correctly.
Initial security setup, including setting an admin password.
Process for integrating IP cameras into the surveillance system.
Overview of the real-time video monitoring interface.
Core functions available in live view, like screen modes and recording.
Setting video compression, resolution, and bitrate for recordings.
Scheduling recording based on time or events.
Setting up motion detection to trigger recording.
Configuring recording based on external alarm inputs.
Configuring recording based on VCA events.
Ensuring data safety by recording to multiple HDDs.
Accessing and reviewing recorded video footage.
Locating footage based on specific detected events.
Procedures for saving recorded data for safekeeping.
Method for backing up standard video and picture files.
Backing up footage related to specific detected events.
Configuring motion detection parameters and sensitivity.
Setting up alerts for loss of camera signal.
Configuring alerts for camera lens tampering.
Configuring system responses to various errors like HDD issues or network disconnections.
Defining system actions triggered by alarms or exceptions.
Basic IP configuration for network connectivity.
Preparing new hard drives for use with the DVR.
Setting up alerts for HDD malfunctions.
To Next Page