Network Video Recorder User Manual
171
3) Click Apply button to save the settings.
4) You can click Refresh button to get the latest status of the port mapping.
UPnP™ Settings Finished-Manual
Enter the virtual server setting page of router; fill in the blank of Internal Source Port with
the internal port value, the blank of External Source Port with the external port value, and
other required contents.
Each item should be corresponding with the device port, including server port, http port, RTSP port
and https port.
Setting Virtual Server Item
The above virtual server setting interface is for reference only, it may be different due to different
router manufactures. Please contact the manufacture of router if you have any problems with
setting virtual server.
Configuring Virtual Host
Purpose:
You can directly get access to the IP camera management interface after enabling this function.
The Virtual host function can be only configured through the web browser.
Enter the Advanced settings interface, as shown in the Figure 11-21.
Configuration > Network > Advanced Settings > Other
To Next Page
Loading...
Need help?
General
