HIKVISION HWT-T250-M


Keep the camera away from liquid while in use for non-
water-proof device.

While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Mark Description
Table 0-1 Mark Description
Mark Description
DC Voltage
1 Introduction
1.1
Product Features
The main features are as follows:

High performance CMOS sensor

IR cut filter with auto switch

OSD menu with configurable parameters

Auto white balance

Internal synchronization

SMART IR mode

3-axis adjustment
1.2
Overview
This manual applies to six types of cameras. The
overviews of each type are shown in the figures below.
1.2.1 Overview of Type I Camera
DC12VIN
Video Cable
Power Cord
12
VDC
Switch Button
Mounting Base
Main Body
Enclosure
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
1.2.2 Overview of Type II Camera
DC12VIN
Enclosure
Main Body
Mounting
Base Video Cable
Switch Button
Power Cord
12 VDC
Figure 1-2 Overview of Type II Camera
Note:
批注
[KL1]:
海螺
14&
海螺
17 2
批注
[KL2]:
海螺
13 4