HIKVISION iDS-2CD9856-BIS

Note
The real-me capture should be used with dedicated plaorm.
Steps
1.
Go to Conguraon → Storage → Storage Management → Cloud Storage .
Figure 4-6 Set Cloud Storage
2.
Check Enable.
3.
Select Version.
V1.0
a. Enter IP Address and Port
b. Enter User Name and Password.
c. Enter Cloud Storage ID and Violaon Cloud Storage ID according to the server
storage area No.
V2.0 a. Enter IP Address and Port
b. Enter accessKey and secretKey.
c. Enter Resource Pool ID according to the server storage area No. of uploading
pictures.
4.
Click Save.
4.2 Set Quota
Set the video and picture rao in the storage.
Before You Start
Install the storage card.
Network Trac Camera Operaon Manual
19