HIKVISION iDS-2CD9856-BIS - Vehicle Capture and Recognition Service

(deviaon distance/100). Set the value according to the actual needs. Range: -100% to 100%.
The LPR area frame moves up if the value is negave, and it moves down if the value is
posive.
Enable License Plate Frame
The license plate frames will be overlaid on the captured pictures.
Enable Mul-Way Upload
Data will be uploaded in mulple set ways simultaneously.
3.
Click Save.
10.9.2 Vehicle Capture and Recognion Service
Set the vehicle capture and recognion service to debug the device.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Advanced → Vehicle Capture and Recognion Service .
2.
Check the service(s) according to your needs.
Note
The supported services vary with dierent models. The actual device prevails.
Filter Checkpoint Capture of Same Vehicle
It is used to debug the device with the same vehicle. When the same vehicle is triggered
many mes during a short period in the scene, the checkpoint pictures of the vehicle will not
be captured.
Note
For some models, you can set Eecve Time of Filtering.
Enable Turning Trac Flow Stascs
In video analysis E-police mode, the turning trac ow stascs will be uploaded to the
connected plaorm.
Filter Violaon Capture of Same Vehicle
It is used to debug the device with the same vehicle. When the same vehicle is triggered
many
mes during a short period in the scene, the violaon pictures of the vehicle will not be
captured.
Not Add No. Aer Violaon Type
The No. of the captured pictures will not be added aer the overlaid violaon type on the
pictures.
Network Trac Camera Operaon Manual
55