HIKVISION iDS-2CD9856-BIS

Steps
1.
Go to Conguraon → Storage → Storage Management → HDD Management → HDD Quota .
Figure 4-7 Set Quota
2.
Set Capture Quota Rao and Video Quota Rao according to the actual needs.
Note
The percentage sum of the capture and video quota rao should be 100 %.
3.
Click Save.
What to do next
Format the storage card aer the sengs.
4.3 Set Record Schedule
Set record schedule to record video automacally during congured me periods.
Before You Start
Install the storage card.
Steps
1.
Go to Conguraon → Storage → Schedule Sengs → Record Schedule .
2.
Oponal: Enable the recording overwring.
When the storage is full, the earliest videos will be overwrien.
3.
Enable the record schedule.
Network Trac Camera Operaon Manual
20