HIKVISION iDS-TCV907-BER Configuration Manual

Speeding Capture
Check it to capture the speeding violaon. One more picture will be captured beyond the set
number of captured picture(s).
Capture Interval
Set Interval (dm) (the distance between the adjacent captures) if you select Distance, and set
Capture Interval (ms) (the me between the adjacent captures) if you select Time.
4.
Click Save.
1.7.4 Set Scene Mode
Set the capture type, capture mode, and speed detecon mode for the applicaon mode.
Steps
Note
●
Not all the applicaon modes support scene mode sengs.
●
The scene mode parameters vary with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Applicaon Mode .
2.
Select
Applicaon Mode.
3.
Set Capture Type.
Motor Vehicle, Non-Motor Vehicle, and Pedestrian
The motor vehicles, non-motor vehicles, and pedestrians in the scene will be recognized and
captured.
Motor Vehicle and Non-Motor Vehicle
The motor vehicles and non-motor vehicles in the scene will be recognized and captured.
Motor Vehicle
Only the motor vehicles in the scene will be recognized and captured.
Non-Motor Vehicle
Only the non-motor vehicles in the scene will be recognized and captured.
4.
Set Capture Mode.
Flash
It adopts the separate exposure, and is applicable to the
condion of viewing face pictures
clearly at night.
Note
In ash mode, if you enable driving on the lane and lane change detecon, the ash light will
not on, but captures will be triggered normally.
Strobe
Network Trac Camera Conguraon Manual
34

HIKVISION iDS-TCV907-BER Specifications

General

Brand	HIKVISION
Model	iDS-TCV907-BER
Category	Security Camera
Language	English