HIKVISION iDS-TCV907-BER Configuration Manual

Figure 1-21 Set License Plate Recognion Parameters
2.
Set Country/Region according to the actual needs.
3.
Select License Plate
Recognion.
-
Select Forward when license plates of vehicles from the approaching
direcon need to be
recognized.
-
Select Backward when license plates of vehicles from the leaving direcon need to be
recognized.
-
Select Bidirecon when license plates of vehicles from both the approaching direcon and
the leaving direcon need to be recognized.
4.
Click Save.
Result
In the mixed-trac lane and video analysis E-police modes, the vehicle direcon is recognized by
the algorithm, and corresponding informaon will be overlaid on the captured pictures. In other
modes, the corresponding
informaon will be overlaid on the captured pictures according to the
selected license plate recognion direcon.
1.9.3 Set Supplement Light Parameters
Supplement light can enhance the image stabilizaon and adjust the brightness and color
temperature.
Steps
Note
●
For video intersecon violaon system mode, only strobe light can be connected, and the I/O
eecve status should be set as pulse.
●
The supported parameters vary with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Capture Parameters → Supplement Light Parameters .
Network Trac Camera Conguraon Manual
45

HIKVISION iDS-TCV907-BER Specifications

General

Brand	HIKVISION
Model	iDS-TCV907-BER
Category	Security Camera
Language	English