HIKVISION iDS-TCV907-BER Configuration Manual

5) Oponal: Select Light Shape.
6) Oponal: Set Yellow Light Delay Time.
5.
Set trac light enhancement parameters according to the actual needs.
Note
Keep default sengs if the device supports smart trac light enhancement mode.
Correcon
Level
You can set dierent correcon levels for dierent periods. The higher the value is, the
brighter the
trac image color will be.
Detecon Sensivity
It is recommended to adjust by 5 once. This funcon is valid during dayme. The higher the
value is, the less enhancement excepon is.
Extended Pixel
It is recommended to adjust by 5 once. The higher the value is, the clearer the enhanced area
is.
Halo Suppression Level
It is recommended to adjust by 10 once. This funcon is valid during night. The higher the
value is, the lighter the halo is.
Exposure Level
The higher the exposure level is, the brighter the image is.
Extended Pixel of Mask
It is recommended to adjust by 1 once. The higher the value is, the less possibility to get
exceponal image edges of the trac lights. However, the trac lights will be easily
enhanced.
6.
Click Save.
Set
Trac Light Synchronizaon
If you want to synchronize the shuer with the trac light, enable the trac light synchronizaon.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Go to Conguraon → Video → Camera Parameter → Power Synchronizaon .
2.
Check Power
Synchronizaon.
Network Trac Camera Conguraon Manual
56

HIKVISION iDS-TCV907-BER Specifications

General

Brand	HIKVISION
Model	iDS-TCV907-BER
Category	Security Camera
Language	English