HIKVISION KH6 Series - Chapter 3 Local Configuration; Quick Operation Wizard

Figure 1-8 Time Synchronizaon
2.
Enable Enable NTP.
3.
Set the synchronizing interval, enter the IP address/domain of NTP server and
port No., and select the me zone.
Note
•
The default unit of synchronizing interval is minute.
•
The me zone can be congured as well if the NTP is not enabled.
1.5 Sound Sengs
Set the ringtone sound and the volume.
1.5.1 Call
Sengs
You can set the ringtone, ring duraon, call forwarding me on call sengs page.
Steps
1.
Tap Sengs → to enter the call sengs page.
Network Indoor
Staon Conguraon Guide
10