HIKVISION KH6 Series Configuration Guide

Note
•
The default port No. is 8000.
•
Aer eding the local network parameters of device, you should add the
devices to the device list again.
Linked Devices Network Conguraon
In the linked devices network conguraon page, you can congure the network
parameters of master
staons, SIP servers and management centers of the same
LAN. The devices can be linked to the door staon and realize the linkage between
these devices.
Steps
1.
Click Linked Network Conguraon to enter linked network conguraon page.
Figure 2-19 Linked Network Conguraon
2.
Enter the master staon IP address, (main) door staon IP address, SIP server IP
address, management center IP address, and doorphone IP address.
3.
Select the main door staon type from the drop-down list.
4.
Click Save to enable the sengs.
Network Indoor
Staon Conguraon Guide
33

HIKVISION KH6 Series Specifications

General

Brand	HIKVISION
Model	KH6 Series
Category	Control Panel
Language	English