HIKVISION KH6 Series - Remote Configuration

Steps
1.
Select an organizaon in the organizaon list and click +Add on the person panel
to pop up the adding person dialog.
Note
The Person ID will be generated automacally and is editable.
2.
Set basic person informaon.
1) Enter basic informaon: name, gender, tel, birthday details, eecve period
and email address.
2) Oponal: Click Add Face to upload the photo.
Note
The picture should be in *.jpg format.
Click Upload Select the person picture from the local PC to
upload it to the client.
Click Take Phone Take the person's photo with the PC camera.
Click Remote
Collecon
Take the person's photo with the collecon device.
3.
Issue the card for the person.
1) Click Credenal → Card .
2) Click + to pop up the Add Card dialog.
3) Select Normal Card as Card Type.
4) Enter the Card No.
5) Click Read and the card(s) will be issued to the person.
4.
Add
ngerprints to the person.
1) Click
Credenal → Fingerprint .
2) Click + to pop up the Add Fingerprint dialog.
3) Select Collecon Mode.
4) Select Fingerprint Recorder or Device.
5) Click Start to collect the
ngerprint.
6) Click Add.
Import and Export Person
Informaon
Network Indoor Staon Conguraon Guide
37