EasyManuals Logo

HIKVISION KH6 Series Configuration Guide

HIKVISION KH6 Series
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Linked network parameters refers to the network parameters of devices (like door
staon, doorphone, master staon, center, etc.), to which the indoor staon is
linked. Linked devices for the indoor staon refers to door staon, center, master
staon, and doorphone.
With the private SIP protocol, intercom can be realized only when all these devices
are in the same network segment with the indoor staon.
With the standard SIP protocol, intercom can be realized when all these devices
support the standard SIP protocol.
Steps
Note
The doorphone does not support adding with the standard SIP protocol.
Here take door staon network sengs as example.
1.
Tap
Sengs Conguraon , and enter admin (acvaon) password.
2.
Tap to enter the device management page.
Figure 1-3 Device Management Page
3.
Tap Indoor Extension and select a connect indoor extension.
4.
Tap Main Door
Staon to pop up the device informaon dialog.
Network Indoor
Staon Conguraon Guide
3

Other manuals for HIKVISION KH6 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION KH6 Series and is the answer not in the manual?

HIKVISION KH6 Series Specifications

General IconGeneral
BrandHIKVISION
ModelKH6 Series
CategoryControl Panel
LanguageEnglish

Related product manuals