11
EURO 46 V10 Programming Manual
Proceed with the programming of actions to each key.
Delete/Change User (Key fobs)
1. Enter Master Manager menu (press the d Key then enter code).
2. Scroll to the function ‘EDIT USERS?’.
3. Select ‘Delete/Change User?’
4. Choose the key fob to delete = Between the brackets will show [******].
5. Press c = The brackets will be showing [ ] to confirm the deletion.
Program Key fob Buttons?
This menu is used to program the functionality of the buttons on the key fobs and is available in the
Engineer menu -> Wireless Device Control -> Program Key fob Buttons.
Choose User
Select the user key fob to program.
Select Button
The different buttons and button combinations that may be programmed are:
[1] Lock Button
[2] Unlock Button
[3] Button I
[4] Button II
[5] Lock + Unlock Buttons
[6] I + II Buttons
[7] Lock + I Buttons
[8] Unlock + II Buttons
Button Action
Options are: ‘show status’, ‘set area’, ‘unset area’ and ‘operate output’. Two key combinations may
also have ‘hold up’ assigned to them. ‘Set area’ features a sub-option to choose which area to set.
‘Operate output’ features a sub option to choose which output to trigger.
User Controls
If an action is programmed as ‘set area’, then the areas which the key fob will control can be selected
here.
PLEASE NOTE: Once all wireless inputs are learnt, an input type must be assigned to them, this is
programmed in ‘change inputs’.
To Next Page
Loading...
Need help?
General
