Network Video Recorder Quick Start Guide
18
2.2 Hard Disk Installation
Before You Start
Disconnect the power from the NVR before installing a hard disk drive (HDD). A factory
recommended HDD should be used for this installation.
Tools Required: Screwdriver.
2.2.1 Front Panel Plug-Pull Installation
Front panel plug-pull installation is applicable when you need to open the device front panel with
key and install the HDD.
Step 1 Fix mounting ears to HDD with screws.
Figure 2-1 Fix Mounting Ears to HDD
Step 2 Unlock the front panel with the attached key, and press the buttons on both sides of the
front panel to open it.
Figure 2-2 Open Front Panel
Step 3 Insert the HDD until it is fixed firmly.
To Next Page
Loading...
