EasyManuals Logo

HIKVISION S-7708NI-I4/8P User Manual

HIKVISION S-7708NI-I4/8P
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
Network Video Recorder User Manual
69
The PoE is enabled with the short network cable mode (OFF) by default.
The bandwidth of IP camera connected to the PoE via long network cable (100 - 300 meters)
cannot exceed 6 MP.
The allowed max. long network cable may be less than 300 meters depending on different
IP camera models and cable materials.
When the transmission distance reaches 100 to 250 meters, you must use the CAT5E or
CAT6 network cable to connect with the PoE interface.
When the transmission distance reaches 250 to 300 meters, you must use the CAT6
network cable to connect with the PoE interface.
Refer to the Appendix 18.5.3 List of IP Cameras Connected to PoE by Long Network Cable
(100 - 300 m) for the list of IP cameras.
You can check the connecting status and power information of POE channel on the interface.
Step 3 Click Back to finish the settings.

Table of Contents

Other manuals for HIKVISION S-7708NI-I4/8P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION S-7708NI-I4/8P and is the answer not in the manual?

HIKVISION S-7708NI-I4/8P Specifications

General IconGeneral
BrandHIKVISION
ModelS-7708NI-I4/8P
CategoryNetwork Hardware
LanguageEnglish

Related product manuals