Need help?Do you have a question about the Hill-Rom LikoGuard L and is the answer not in the manual?
General| Brand | Hill-Rom |
|---|---|
| Model | LikoGuard L |
| Category | Medical Equipment |
| Language | English |
Provides physical dimensions and measurement details for the lift unit in mm and inches.
Illustrates the layout of the Printed Circuit Board (PCB) and its connections.
Safety advice, handling, and charging instructions for the Li-Ion battery.
Addresses common lift problems like not working or stopping unexpectedly.
Explains the structure and origin of error codes displayed by the system.
Provides specific recovery steps and advice for various error codes.
Step-by-step instructions for replacing the HandControl unit.
Overview of HandControl operation, display fields, and battery status.
Explanation of symbols and messages displayed on the HandControl screen.
Displays how many days until the next service is due or how many days past.
Instructions on how to select and confirm a new display language.
Details on entering the password to access the advance service menu.
Procedure to reset the service interval after maintenance.
Information on total power consumption and usage since last service.
Details regarding the transfer motor's speed settings.
Shows counts of stops due to overload and exceeded duty cycles.
Records total stops from upper and lower limit switch activations.
Displays recent error messages and options to reset them.
How to adjust the time period for the service reminder symbol.
Instructions for storing data from the main board to the HandControl.
Instructions for transferring data from HandControl to the main board.
Details on hardware and software versions of main board and pendant.
Guidelines for performing potentiometer calibration for proper function.
To Next Page