6.3 Using Lateral Motion
To use Lateral Motion with flexion,
insert the flexion handle (tiller) into the
receptacle, just above the ankle
cushion (photo 20). Disengage the
lateral lock handle counter-clockwise
(photo 21). This will allow the lower part
of the table to move freely from side-to-
side. You can also lock the cushion
laterally at any point on either side by
turning the lock to the 6 o’clock
position. Also, be sure the handle is
locked before patient exits the table.
10
© Copyright 2020, Hill Laboratories
photo 21
photo 20
To Next Page
Loading...