11
© Copyright 2020, Hill Laboratories
Maintenance
Regular Maintenance
Your Hill AFT is practically maintenance free. There is no lubrication of
parts needed.
Trouble Shooting
Problem
The Cervical Cushion cocks up but does
not stay up. The drop pin has come out of
it’s L-bracket.
To Fix:
1. Loosen the Cervical Drop Tension Knob enough to rotate the drop pin (see
“A” in photo) so that the spring pin (B) faces and engages the bracket (C) as shown
in the photo. Once the pin is turned into the bracket, retighten the Tension Knob.
Problem
The main power board is turning off on it’s
own. This is likely the Auto-Shutdown mode
operating normally.
When the AFT is left inactive for 2 hours,
the Auto-Shutdown mode will power the
main control board down automatically.
To Fix:
Simply press the green power button.
Problem
The compressor runs more than 2 or more minutes at a time to replenish the table’s
air supply.
To Fix:
Please call your local dealer or contact Hill Support directly (see below).
A
B
C
To Next Page
Loading...