What to do if my Hilti Drill gets very hot?
If your Hilti Drill or its battery becomes very hot, it indicates an electrical fault. Immediately switch off the product, remove the battery, keep it under observation, and allow it to cool down. Then, contact Hilti Service for assistance.
Why does my Hilti Drill running speed suddenly drop?
If the running speed of your Hilti Drill suddenly drops considerably, it's likely because the battery is discharged. Replace the discharged battery with a fresh one and charge the empty battery.
What to do if the Hilti Drill battery won't click in?
If the battery does not engage with an audible click on your Hilti Drill, the retaining lugs on the battery may be dirty. Clean the retaining lugs and then engage the battery in the working position.
What to do if LEDs of the Hilti NURON SIW 10-22 battery show nothing?
If the LEDs on your Hilti Drill battery show nothing, it indicates that the battery is defective. Contact Hilti Service for assistance.
What to do if my Hilti Power Tool or battery gets very hot?
If your Hilti Power Tool or its battery becomes very hot, it may indicate an electrical fault. Immediately switch off the product, remove the battery, keep the battery under observation, and allow it to cool down. Then, contact Hilti Service.
Why does the running speed of my Hilti Power Tool suddenly drop?
A sudden drop in the running speed of your Hilti Power Tool is likely due to a discharged battery. Replace the discharged battery with a charged one.
Why does my Hilti Power Tool battery run down quickly?
If your Hilti Power Tool battery is draining faster than usual, it could be due to a very low ambient temperature. Allow the battery to warm up slowly to room temperature.
What to do if the Hilti Power Tool battery does not engage with a click?
If the battery of your Hilti Power Tool doesn't engage with an audible click, the retaining lugs on the battery might be dirty. Clean the retaining lugs and then engage the battery in the working position.
What to do if LEDs of the Hilti Power Tool battery show nothing?
If the LEDs on your Hilti Power Tool battery aren't showing anything, it could indicate that the battery is defective. Contact Hilti Service.
General| Voltage | 22V |
|---|---|
| Battery Type | Li-ion |
| Max Torque | 1000 Nm |
| Number of gears | 3 |
| RPM gear 3 | 1800 rpm |
| Drilling Capacity (Metal) | 13 mm |
| Drilling Capacity (Masonry) | 22 mm |
To Next Page
