Need help?Do you have a question about the Hilti SSH 6-A22 and is the answer not in the manual?
General| Voltage | 22V |
|---|---|
| Battery Type | Li-ion |
| Chuck Type | Keyless chuck |
| Weight | 4.4 lb (2.0 kg) |
| Speed Settings | 2 |
| Drilling Capacity (Metal) | 13 mm |
| Drilling Capacity (Masonry) | 16 mm |
Information on the purpose and importance of the manual for safe operation.
Explains signal words like DANGER, WARNING, CAUTION and their meanings.
Lists symbols used within the document text and their meanings.
Explains symbols used in the product illustrations and their references.
Provides overarching safety guidelines for operating power tools.
Safety precautions related to electrical hazards when using the power tool.
Safety measures for the operator's well-being during tool use.
Guidelines for proper operation, maintenance, and tool care.
Specific instructions for using and caring for battery-powered tools.
Guidelines for handling and maintaining Li-ion batteries.
Further safety recommendations beyond general warnings.
Describes symbols that may appear on the power tool itself.
Identification and labeling of the tool's main components.
Specifies the product's designed purpose and applications.
Lists the components included with the tool package.
Explains the system that prevents motor overheating.
Details how to interpret the battery charge level indicators.
Technical specifications related to the battery pack.
Data on sound pressure and vibration levels according to standards.
Information on selecting the correct blade for different cutting tasks.
Instructions for safely charging the Li-ion battery.
Procedures for correctly installing the battery into the tool.
Steps for safely detaching the battery from the tool.
How to adjust the motor speed for different cutting applications.
Steps to turn on the power tool and engage the motor.
Guidance on performing cutting operations with the tool.
Instructions for detaching the cut material strip.
Steps to safely stop the power tool's operation.
Procedure for replacing a worn or damaged cutting blade.
Instructions for replacing the cutting rails.
Steps for replacing the component that cuts off swarf.
Safety guidelines for transporting the tool and batteries.
Recommendations for storing the tool and batteries safely.
Table listing common faults, their causes, and solutions.
To Next Page
