Need help?Do you have a question about the Hilti TE 12-S and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Weight | 2.6 kg |
| No-load speed | 0 - 1100 rpm |
| Tool chuck type | SDS-plus |
| Max. drilling diameter in concrete | 12 mm |
Essential safety rules for electric tools to prevent injury and hazards.
Steps for connecting power, adjusting the side handle, and lubricating the chuck.
Instructions for performing hammer drilling and inserting bits.
Instructions for performing rotary drilling using the tool.
Guidance on bit wear, resharpening, and carbide bit tip care.
A chart detailing Hilti bits and anchors with their specifications.
Details on the keyless chuck adaptor for twist bits.
Information on tool servicing, repair, and warranty policy.
To Next Page
