Why is my Hilti Drill not working?
If your Hilti Drill does not work, ensure the battery is fully inserted. Push the battery in until you hear an audible click. Also, check if the battery is discharged and replace it if necessary.
What to do if my Hilti NURON SBT 4--22 gets very warm?
If your Hilti Drill product or battery gets very warm, immediately switch off the product, remove the battery, keep it under observation, and allow it to cool down. This could be due to an electrical fault. After cooling down, contact Hilti Service.
What to do if LEDs of Hilti NURON SBT 4--22 battery show nothing?
If the LEDs of the Hilti Drill battery show nothing, it could indicate that the battery is defective. In this case, contact Hilti Service.
What to do if the Hilti NURON SBT 4--22 Drill control switch is stuck?
If the control switch of your Hilti Drill cannot be pressed or is stuck, it might be because the forward/reverse switch is in the middle position. Push the forward/reverse switch to the left or right to resolve this.
Why does the Hilti NURON SBT 4--22 battery run down quickly?
If the battery of your Hilti Drill runs down more quickly than usual, it could be due to a very low ambient temperature. Allow the battery to warm up slowly to room temperature.
How to fix Hilti NURON SBT 4--22 battery that doesn't click in?
If the battery of your Hilti Drill does not engage with an audible click, the retaining lugs on the battery might be dirty. Clean the retaining lug and push the battery in until it engages. If the problem persists, contact Hilti Service.
Covers work area safety, electrical safety, personal safety, and proper tool use and care.
Details safety for cutting tools, accessories, battery use, and general care.
Specific safety advice for using long drill bits, including speed and pressure.
Further safety advice on dust, vibration, LED light, product activation, and accessory handling.
Safety guidelines for handling and using Li-ion batteries, including care and precautions.
Provides technical specifications for the drill/driver, including voltage, weight, and speed.
Crucial safety warning about preventing accidental starts before making adjustments.
Critical warning to remove the battery before any care or maintenance tasks.
Warning about accidental starting of products during transport.
Warning about damage from defective or leaking batteries during storage.
Warning about hazards from improper disposal of batteries and tools.
To Next Page
General
