English 21
▶ The laser beam must not be allowed to project beyond the controlled
area.
▶ Switch the laser tool off when it is not in use.
▶ Activate the locking function in the tool settings in order to prevent
unauthorized persons, especially children, from activating the laser beam.
▶ Store laser tools, when not in use, in places to which unauthorized persons
have no access.
2.5 General safety rules
▶ Check the product for damage before use. Have the damage repaired by
Hilti Service.
▶ Before using the product, just to be sure, check the product’s preset
settings and any settings you have made yourself.
▶ Do not use the product while you are driving a vehicle or operating a
machine.
▶ Check the accuracy of the product after it has been dropped or subjected
to other mechanical stresses.
▶ Although the product is designed for the tough conditions of jobsite use,
as with other measuring instruments it should be treated with care.
▶ Although the product is protected against the entry of moisture, it should
be wiped dry before being put away in its transport container.
▶ Store tools and appliances out of reach of children when not in use.
Do not allow persons who are unfamiliar with the product, or with these
instructions, to operate the product. Tools or appliances are dangerous
in the hands of untrained, inexperienced persons.
3 Description
3.1 Product overview 1
@
On/off switch
;
Measure command buttons
=
Touchscreen
%
Micro-USB socket, type B
&
Hinged cover
(
Laser exit window
)
Camera lens
+
Glass cover
§
Thread for extension
/
Image-recording camera (PD-
CS)
3.2 Intended use
The product described is a laser range meter. It is designed to be
used for measuring distances. The measured distances can be used in
conjunction with a wide range of calculation functions, e.g. areas, volumes,
minimum/maximum distances, Pythagoras calculations, laying out, etc.
To Next Page
Loading...
Need help?
General
