Why does my Hilti SBT 4-A22 tool or battery get very hot?
If your Hilti Power Screwdriver tool or battery is getting very hot, it's likely that the tool is overloaded, exceeding its application limits. Review the power and performance rating of the product before using it to ensure it's suitable for the task at hand.
Why does the battery on my Hilti Power Screwdriver run down more quickly than usual?
If the battery on your Hilti Power Screwdriver is draining faster than usual, it could be due to a very low ambient temperature. Allow the battery to warm up slowly to room temperature.
How to fix no hammering action on Hilti SBT 4-A22 Power Screwdriver?
If there is no hammering action on your Hilti Power Screwdriver, ensure that the operating mode is correctly set at the selector ring. Set the selector ring to the 'Hammer drilling' position.
Why the on/off button cannot be pressed on my Hilti Power Screwdriver?
If the on/off button on your Hilti Power Screwdriver cannot be pressed, it's likely because the forward/reverse switch is in the middle position. Push the forward/reverse switch to the left or right.
General| Battery Voltage | 21.6 V |
|---|---|
| No-load Speed | 0 - 2300 rpm |
| Weight | 1.7 kg |
| Battery type | Li-ion |
| Chuck type | 1/4" hex |
Details the meaning of various symbols and signal words used throughout the document for clarity.
Covers crucial safety advice for operating power tools, including work area and electrical safety.
Provides specific safety instructions and precautions for drilling operations.
Details safe practices for handling, charging, and using the product's batteries.
To Next Page
