English 11
5.4 Selecting the gear
▶ Select the desired gear by adjusting the two gear selector switches.
5.5 Setting forward or reverse rotation
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the
middle position (safety lock).
▶ Set the forward/reverse switch to the desired direction of rotation.
5.6 Inserting/removing the accessory tool
1. Set the forward/reverse switch to the middle position or remove the
battery from the power tool.
Printed: 07.01.2019 | Doc-Nr: PUB / 5174908 / 000 / 02
To Next Page
Loading...
