To Next PageTo Next PageWhat to do if my Hilti SF 2-A12 Drill battery becomes very warm?
If the power tool or the battery becomes very warm, it may indicate an electrical fault. Immediately switch off the power tool, remove the battery, keep it under observation, and allow it to cool down. After that contact Hilti Service.
Why can't I press the control switch on my Hilti Drill?
If the control switch can’t be pressed on your Hilti Drill, it means that the switch is locked. This is because the forward/reverse selector switch is in the middle position. To resolve this, set the forward/reverse switch to the desired position.
What to do if my Hilti Drill is overloaded?
If the tool is overloaded (application limits exceeded), select a suitable power tool for the application.
How to properly insert the battery into my Hilti Drill?
To properly insert the battery into your Hilti Drill, push the battery in until it engages with an audible click.
What to do if the Hilti SF 2-A12 battery doesn’t engage with an audible click?
If the battery doesn’t engage with an audible click, it may be because the retaining lugs on the battery are dirty. Clean the retaining lug and push the battery in until it engages. If the problem persists, contact Hilti Service.
General| Battery Voltage | 12 V |
|---|---|
| Battery Type | Li-ion |
| Weight | 1.1 kg |
| Dimensions (L x W x H) | 190 mm |
| Chuck Type | Keyless |
