28 English 362170
*362170*
2. Push the battery into the battery holder until it engages with an audible
click.
3. Check that the battery is seated securely.
5.3 Removing the battery
1. Press the battery release buttons.
2. Remove the battery from the tool.
5.4 Fitting and adjusting the side handle 2
▶ Fit or adjust the side handle.
5.5 Fitting the belt hook (optional) 3
The belt hook enables you to attach suitable power tools to your belt. It can
be fitted to allow attachment on the left or right side of the body.
CAUTION
Risk of injury by falling power tools!
▶ Check that the belt hook is fitted securely before beginning work.
1. Fit the belt hook.
2. Attach your power tool to the belt hook.
3. Check that belt hook and power tool are secure.
5.6 Fitting the accessory tool
1. Set the forward/reverse switch to the middle position or remove the
battery from the power tool.
2. Check that the connection end of the accessory tool is clean. Clean the
connection end if necessary.
3. Open the keyless chuck.
4. Insert the accessory tool into the keyless chuck and then turn the chuck
firmly by hand until tight and several clicks are heard.
5. Check that the accessory tool is held securely.
6 Operation
Observe the safety instructions and warnings in this documentation and on
the product.
6.1 Selecting the gear 4
▶ Select the gear.
6.2 Setting forward or reverse rotation 5
▶ Set the forward/reverse switch to the desired direction of rotation.
▶ An interlock prevents switching while the motor is running. In the middle
position the switch is locked (safety lock).
To Next Page
Loading...
Need help?
General
