Hilti SF 22-A Original Operating Instructions

*362170*
362170 English 25
Overloading or overheating are not indicated by the charge status
display.
3.4 Liion battery display
The charge status of the Li-ion battery and malfunctions of the power tool are
indicated by the display on the Liion battery. The charge status of the Liion
battery is displayed after pressing one of the two battery release buttons.
Status Meaning
4 LEDs light. Charge status: 75 % to 100 %
3 LEDs light. Charge status: 50 % to 75 %
2 LEDs light. Charge status: 25 % to 50 %
1 LED lights. Charge status: 10 % to 25 %
1 LED blinks, the power tool is
ready for use.
Charge status: < 10 %
1 LED blinks, the power tool is not
ready for use.
The battery has overheated or is
completely discharged.
4 LEDs blink, the power tool is not
ready for use.
The power tool is overloaded or has
overheated.
Battery charge status cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given
in the Troubleshooting section.
3.5 Items supplied
Drill / driver, side handle, operating instructions.
• Other system products approved for use with this product can be found
at your local Hilti Store or online at: www.hilti.group
4 Technical data
4.1 Drill/driver
SF 22-A SFH 22-A
Rated voltage
21.6 V 21.6 V
Weight in accordance with EPTA Pro-
cedure 01 including B22⁄8.0 battery
3.1 kg 3.2 kg
Speed 1st gear
0 /min …
370 /min
0 /min …
370 /min
2nd gear
0 /min …
1,250 /min
0 /min …
1,250 /min

Hilti SF 22-A Specifications

General

Brand	Hilti
Model	SF 22-A
Category	Drill
Language	English