8 English
▶ Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the
product in a non-flammable location, well away from flammable materials,
where it can be kept under observation and allowed to cool down. In this
case, always contact your Hilti Service.
3 Description
3.1 Product overview
@
Keyless chuck
;
Torque and drilling mode se-
lector ring
=
Side handle
%
Control switch
&
Forward/reverse selector
switch with safety lock
(
Gear speed selection switch
Printed: 02.05.2019 | Doc-Nr: PUB / 5152170 / 000 / 03