Hilti SIW 22T-A 0.5 Inch - Operation; Setting Forward or Reverse Rotation

English 9
Vibration values
SIW 22TA
1
/
2
SIW 22TA
3
/
4
Vibration emission value when tightening screws/bolts
and nuts of the maximum permitted size
14.5 m/s² 14.2 m/s²
Uncertainty for tightening screws/bolts and nuts of the
maximum permitted size
1.5 m/s² 1.5 m/s²
5 Operation
5.1 Fitting the belt hook (optional)
WARNING
Risk of injury! Hazard presented by a falling power tool.
▶ A falling power tool may present a risk of injury to yourself and others. Check that the belt hook is fitted
securely before beginning work.
The belt hook allows the power tool to be attached to a belt worn by the operator. The belt hook can
be fitted to allow attachment on the left or right side of the body.
1. Disconnect the battery from the tool.
2. Fit the mounting plate into the guides provided.
3. Use the 2 screws to attach the belt hook and make sure that the screws are driven fully (countersunk
head flush).
5.2 Setting forward or reverse rotation
In the middle position, the forward / reverse selector switch serves as a safety lock.
Printed: 05.04.2018 | Doc-Nr: PUB / 5136064 / 000 / 05