Hilti SIW 22T-A 0.5 Inch - Fitting the Socket

10 English
▶ Set the forward / reverse selector switch to forward or reverse rotation.
5.3 Fitting the socket
SIW 22T-A
1
/
2
"
CAUTION
Risk of injury through use of the wrong type of accessory tool!
▶ Use only accessory tools of the locking type.
▶ Do not use worn or damaged accessory tools.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Align the hole in the socket with the retention ball on the square drive.
3. Fit the locking ring on the socket.
◁ The socket engages securely.
5.4 Fitting the socket
SIW 22T-A
3
/
4
"
CAUTION
Risk of injury through use of the wrong type of accessory tool!
▶ Use only accessory tools of the locking type.
▶ Do not use worn or damaged accessory tools.
Printed: 05.04.2018 | Doc-Nr: PUB / 5136064 / 000 / 05