6 English 2208241
*2208241*
3 Description
3.1 Product overview 1
@
Locking sleeve for saw blade
;
Blade holder for saw blade
=
Contact shoe
%
Transport lock
&
Grip
(
Battery state of charge indicator
)
Slot on one side/each side for attaching the
Hilti retaining strap/belt hook
+
Battery
§
Battery release button
/
Control switch
:
White LED to illuminate the working area
∙
Saw blade
3.2 Intended use
The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for one-handed operation.
▶ Use only Hilti LiIon batteries of the B 12 series with this product.
▶ Use only Hilti battery chargers of the C4/12 series for charging these batteries.
3.3 Possible misuse
▶ Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶ Do not use the product to cut pipes containing liquids.
▶ Do not saw into unknown materials.
3.4 Items supplied
Reciprocating saw, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Technical data
SR 2-A12
Rated voltage
10.8 V
Weight in accordance with EPTA procedure 01
1.8 kg
Stroke rate
0 /min … 3,000 /min
Stroke length
16 mm
Keyless chuck for standard accessory tools
1/2 in
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.