To Next Page
D
Daniel JonesAug 9, 2025
What to do if my Hilti SC 5ML-22 Saw vibrates excessively?
- LLarry DavisAug 9, 2025
If your Hilti Saw vibrates more than usual, the saw blade might be fitted incorrectly. Remove the saw blade and refit it correctly.
What to do if my Hilti SC 5ML-22 Saw vibrates excessively?
If your Hilti Saw vibrates more than usual, the saw blade might be fitted incorrectly. Remove the saw blade and refit it correctly.
What to do if Hilti Saw doesn’t restart after the saw blade stalled?
If your Hilti Saw doesn’t restart after the saw blade has stalled, the overload cut-out may have been activated. To restart the product, press the switch-on interlock and the on/off button again.
Why doesn't the battery engage with a click on my Hilti SC 5ML-22 Saw?
If the battery does not engage with an audible click on your Hilti Saw, the retaining lugs on the battery might be dirty. Clean the retaining lug and re-insert the battery.
Why does the running speed of my Hilti SC 5ML-22 Saw drop suddenly?
If the running speed of your Hilti Saw suddenly drops, it could be due to two reasons. First, the battery might be discharged, in which case you should charge the battery. Second, the saw advance pressure might be too high. Try reducing the advance pressure and switch the power tool back on.
How to unlock the on/off button on a Hilti SC 5ML-22?
If the on/off button on your Hilti Saw is locked and cannot be pressed, this is not a fault but a safety function. To resolve this, press the switch-on interlock.
Why are chips not transported away by my Hilti SC 5ML-22 Saw?
If chips are not being transported away and are dropping onto the base plate of your Hilti Saw, the chip / dust channel is likely blocked. Clean the chip / dust channel to resolve this issue.
General
