Hilti TE 2000-AVR Manual

*2154381*
2154381 English 5
&
Wheel securing parts (washer, retaining pin)
(
Power tool locating pin
3.3 Intended use
The product described is a hand-held electric breaker. It is designed for chiseling work on concrete, masonry
and asphalt. It can also be used for excavating and compacting.
The tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its rating plate.
3.4 Foreseeable misuse
• The power tool may be used only in a dry environment.
• Do not use the power tool where there is a risk of fire and explosion.
• Working with materials hazardous to health (e.g. asbestos) is not permissible.
3.5 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which reduces vibration noticeably.
3.6 Service indicator
The breaker is equipped with a service indicator LED.
Status Meaning
The service indicator lights red. End of service interval – servicing is due. Return
the product to Hilti Service for servicing in good
time in order to ensure that it is always ready for
use.
A fault has occurred in the power tool.
The service indicator flashes red. Protection against overheating
The voltage provided by the electric supply is too
high.
3.7 Items supplied
Electric breaker, detachable supply cord, operating instructions, grease. The transport trolley is available as
an accessory.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.group
4 Technical data
4.1 Breaker
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool’s
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer’s power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
TE 2000AVR
Weight
14.5 kg
Impact speed
30 Hz
Protection class
II

Hilti TE 2000-AVR Specifications

General

Input power	2100 W
Power source	AC
Power plug type	Type C
Impact energy (max)	32 J
Idle impact rate (max)	1800 IPM
Vibration level (chiseling)	4.8 m/s²
Toolholder	- mm
Product color	Black, Red
Country of origin	Germany
Quantity per shipping (inner) case	1 pc(s)

Weight and Dimensions

Depth	731 mm
Width	574 mm
Height	146 mm
Weight	14500 g
Package depth	100 mm
Package width	150 mm
Package height	76 mm
Package weight	500 g