HIMO ZB20 - Setup, Operation, and Riding Techniques; First ride setup and adjustments

11
Foldable bicycle
The packing list of this folding bicycle includes:
Pre-installed folding bicycle with battery
Charger
Two keys for removing the battery (a spare key)
Power assist
Electric motor
The electric motor of this type of bicycle acts directly on the rear wheel and can provide you with
pedaling support. With the existing control system, you can adjust the degree of motor assistance
and choose different riding levels. The electric motor can help you reach a maximum speed of 25
km/h.
Brake system
The brake can control the speed of the bicycle, let the bicycle slow down or stop.
Disc-brake
Disc-brakes are mechanical drive devices installed on the handlebars, front wheel and rear wheel.
When braking, by manipulating the brake lever on the handlebar, we realize the friction between
the brake and the disc, so as to decelerate. The brake lining will wear out, please check and
replace it regularly.
Battery
Controller
The bicycle is equipped with a controller for adjusting power assist. The controller calculates and
completes the power output of the motor based on the preset speed, actual speed and pedal
stress. The maximum speed of the bicycle is 25 km/h, and no assistance is provided at higher
speed.
Battery Type (Model ZB20): Lithium-Ion Battery, 48 V, 10Ah
The power assist system needs to be equipped with a battery. The battery of this type of bicycle is
located in the frame.
The battery can be removed from the frame with equipped key for charging, and it can also be
charged through the charging port on the bicycle frame.
Only use the equipped battery charger to charge the battery.
Lithium-ion batteries, like most large batteries, are hazardous substances according to the
transportation regulations and are only allowed to be transported when the battery compartment is
installed on a bicycle. For air transportation and ocean transportation, the regulations on hazardous
substances must be complied with. (Please check the local transportation instructions), a hazard
label must be affixed on packing box for the transportation of the batteries.