EasyManua.ls Logo

HIMO ZB20 - Change Speed; Turn On;Turn off the Front;Rear Light; Unfold the Bicycle; Fold the Bicycle

HIMO ZB20
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Fold the bicycle
When folding the bicycle, always make sure that your fingers, hands, and
arms are in a safe area, in order to avoid injury.
WARNING
Please follow the steps below to fold the bicycle:
Adjust the height of the saddle to the lowest limit.
Fold the left and right pedals of the bicycle.
Unfold the shackle on the stem, rotate the handle bar, and fold the bicycle handlebar.
Unfold the shackle in the middle of the frame and fold the bicycle frame in half to complete the
folding of the bicycle.
Unfold the bicycle
Turn on/turn off the front/rear light
The power of the front light is provided by the battery of the bicycle, and the power of the rear light
is provided by the dry battery.
When riding at night, make sure that the battery is fully charged. Even during the daytime, we need
to use lights to make it easier for other road users to notice.
Please follow the steps below to turn on or off the lights:
Turn on the power switch of the instrument
Long press the " " key for 3s to turn on the
lights.
Long press the " " key for 3s to turn off the
lights.
Tear off the insulation paper of the tail light.
Click the tail light switch button to turn on the
tail light.
Click the tail light switch button to turn off the
tail light.
There are hinges in the following places on the bicycle, which can be folded together or one by one.
Please follow the steps below to expand the bike:
Unfold the frame
Unfold the handlebar
Unfold the pedals
Adjust the height of the saddle
Unfold the bicycle frame and close the shackle in the middle of the frame.
Unfold the handle bar of the bicycle and close the shackle on the stem.
Unfold the left and right pedals of the bicycle.
Adjust the height of the saddle according to the rider's height.
Change speed
Use the derailleur handle on the right side of the handlebar and + button to shift gears. According
to the indicator mark on the handlebar, we can see the current gear position.
Please follow the steps below to control the rear derailleur with the handlebar:
Step on the pedals forward.
Turn the derailleur handle (ring 1) counterclockwise by hand to switch to the large gear or larger
gear.
Press the derailleur + button by hand to switch to a smaller sprocket.

Table of Contents

Other manuals for HIMO ZB20

Related product manuals