15
Adjust the saddle
Correct adjustment of the saddle is essential to riding safety. You can freely adjust the height of the
saddle.
Please verify whether the height of the saddle is adjusted correctly by carrying out the following
steps:
When your foot is on the pedals and your legs are nearly but not fully straight, the height is correct.
Please adjust the height of the saddle as follows:
Then you can move the saddle upward and downward to adjust the height.
Sit on the saddle.
Keep sitting.
Place one of the pedals in downward position.
Put your feet on the pedal.
Loosen and open the quick release seat post clamp.
Adjust according to your need.
Damage to the seat post may cause a fall and cause serious injury.
Make sure that the minimum insertion limit mark (minimum insertion amount)
on the seat post is inside the seat tube and is not visible.
WARNING
Reinstall the seat by closing the quick release seat post clamp.
Check whether the seat height is proper after adjustment.
If not, repeat the adjustment procedure.
Sitting on the saddle, the rider should be able to correctly manipulate the brake lever and gear lever
by tilting the elbow slightly while riding.
Check the dimensions of the bicycle
Loss of control due to the incorrect size of the bicycle can cause the bicycle to
fall over, which may cause serious injuries.
Make sure that the size of the bicycle matches your height.
Do not ride a bicycle that does not match your height.
WARNING
The handlebars, the driver's reaction, steering and braking can have an
adverse effect.
WARNING
Before the first ride
Proper adjustment of the bicycle is essential for safety, performance and riding comfort. You need
to have certain experience and use professional tools to adjust the bike on order to get the correct
settings which suit your body and riding conditions. If you don’t understand, be sure to have an
expert set up your bike. If you have experience, knowledge and tools, please accept an expert's
inspection before riding.
To Next Page
Loading...
