Himoinsa STANDARD - Generic Description; Lighting Tower Components

GENERIC DESCRIPTION | PAG. 8
3. GENERIC DESCRIPTION
3.1 COMPONENTS OF THE LIGHTING TOWER
HIMOINSA lighting towers have been made with top quality materials, and with
the effort of our technical and production team, without sparing resources to
achieve high-performance and versatile operation lighting towers. They are
composed of a tower kit and a gen-set, all in a compact and well-balanced trailer.
1. The lighting tower kit is composed of:
• Manual lift mast and 9 expansions, to reach a total working height of
9metres with a 360º manual rotation of the light beam.
• Support for 4floodlights (IP65) with1000w metal halide lamps
and 100,000lumens each (standard for COMPACT STANDARD and
COMPACT HEAVY DUTY models). Lamps prepared to work in ambient
temperatures of -20to45ºC.
• As an optional support for 4 LED 350W floodlights and with 47,955
lumens each (Standard for COMPACT ECO). Lamps prepared to work
in ambient temperatures of -20 to 45ºC.
2. To highlight in between the other components of the lighting tower:
• Soundproofed generator set driven by a YANMAR diesel engine of
high reliability, for model 3TNV76 - GGEH (STANDARD and HEAVY
DUTY) and model L100N5 (50Hz) L100N6 (60Hz) (ECO), cooled by
water and with a very low fuel consumption.
• Sealed control panel for protection and manoeuver. The control
panel incorporates the M7 controller, circuit breakers for the
protection of the spotlights and auxiliary sockets.
• 2auxiliary power outlets. The tower has two auxiliary sockets of
16amps, for the supply of power to auxiliary equipment.
• Double safety lock in mast. Ensures the blockage of the mast and
prevents involuntary turns during the transport. It is necessary to
unlock it for the rotation and orientation of the oodlight.
• Emergency stop.
• Wide access for maintenance and control.