Hioki 3280-1 OF - Functions

EN-10
Functions
Functions
Auto power-saving function
Display will automatically turn off if the instrument
is not used for 30 min.
To resume instrument operation in the previous state, select
the “OFF” position with the rotary switch and then move the
switch to the desired function.
To cancel auto power-saving function
1.
Select the desired function with the rotary switch while
holding down
key.
2.
The LCD display will change from [APS] to [OFF], and
the auto power-saving function will be disabled.
3.
Setting the rotary switch to “OFF” and then reselecting the
desired function will enable the auto power-saving function.
Auto-range function
Automatically sets the measurement range to the
most appropriate range.
Displays [AUTO]
Manual-range function
To set the measurement range arbitrarily.
1.
Select the desired function with the rotary switch while
holding down
key.
2.
Press key to switch the range.
(Can set the range as desired, except during continuity
testing.)
Overfl ow indication
Indication when input exceeds the measurement range.
Displays [OF] or [-OF]