Hioki BT3554-50 - Page 10

ii
Contents
3 Measurement 45
3.1 Inspection Before Measurement ..................46
3.2 Setting the Measurement Ranges ...............47
3.3 Noise-Frequency Reduction Function ........49
3.4 Adjusting the Zero Point
(Zero Adjustment) .........................................50
How to short-circuit various test lead ........................ 51
Performing zero adjustment ......................................54
Troubleshooting on zero adjustment .........................56
Canceling the zero adjustment .................................56
3.5 Using the Hold Function ...............................57
Disabling the hold function ........................................57
Freezing measured values using the 9466
Remote Control Switch .............................................58
3.6 Automatic Hold Function .............................59
3.7 Determining Battery-Deterioration
Evaluation Values ..........................................61
3.8 Measuring Batteries (Inspection) ................62
Measurement error ...................................................65
Warning display ........................................................65
3.9 Measuring Temperature ................................66
4 Comparator Function (Evaluation
Based on Threshold Values) 67
4.1 Overview ........................................................67
4.2 Enabling the Comparator Function .............68
4.3 Setting Threshold Values for the
Comparator .................................................... 69
Comparison table for the comparator .......................76
4.4 Setting the Comparator Buzzer ...................78
4.5 Canceling the Comparator Function ...........79
HIOKI BT3554F961-00HIOKI BT3554F961-00