Hioki BT3554-50 - Using the Hold Function; Disabling the Hold Function

57
Using the Hold Function
3.5 Using the Hold Function
This section describes how to freeze measured values on the
display using the hold function. Press the HOLD key. The [HOLD]
segment will appear and the display will freeze measured values.
• When a warning display appears or the voltage readout exhibits
the [----] segments, the instrument cannot freeze the displayed
value.
• When you change any settings, the instrument will disable the
hold function.
• Turning o󰀨 the instrument will disable the hold function.
Using the automatic hold function can automatically freeze
measured values after they have stabilized.
See “3.6 Automatic Hold Function” (p. 59).
Hold function disabled Hold function enabled
Disabling the hold function
Press the HOLD key again to disable the hold function.
HIOKI BT3554F961-00HIOKI BT3554F961-00